Two thoughts-

1. Is there any script written in "Function NavigatorText (Object)" in script container of base object?

2. When you do any activity on the object, does the base object of the engineering object get changed?

Hello, Thank you for your answer.

I follow the inheritance source and there is a script in function Navigator text. I copied next.

And followed the script above I have the next script:

I don't understood well this script, Is it re writing the att description??

Thank in advance for your comment.

The navigator text

can be governed by default when no configuration set

can be governed by Navigator text script

can be governed by default when navigator text script returns ""

I can see a difference in the scenario as in attachment "NavigatorText.jpg".

Check the base object of this object and check configuration? I will attach the jpg in next post

and place a message box in navigatortext script of base object of "2021.05.17". I will attach the jpg in next post. Check what is in message box.

second message. 

Note: both msg appear too many time. maybe 3 or 4 time each.

AutoGen_4387759

second message. 

Note: both msg appear too many time. maybe 3 or 4 time each.

 Hello

1. The actual description ( AD) and Navigator text 'description' (NTD) may be different at the same 

2. Here please observe that if AD and NTD are different and if it is because of the Navigator textscript, then it is because of "strCommonClass = "Chemserv.CommonClass"". As it is a Standard dll, please check with COMOS GTAC/ QTAC regarding the functioning of the dll.