Hi all,

Normally we can check for any inconsistencies on a drawing once we have opened the drawing. But is there a way to check it via script without opening the drawing?

For example, drag & drop a P&ID document to "Object A" field of the Object Debugger. Then run some script from the Expression or the Script area.

I've tried using a.report.reportdocument.items.[available syntax] to look for possible related syntax but couldn't find any that works for what I intended to do.

Any ideas or suggestions are greatly appreciated. Thanks 

Hi SuperPippo,

Nice to hear from you too.

I believe Siemens Lifecycle Services is a paid service right? 

I'll consider contacting them later on. 

Thank you for your feedback.

kind regards

Set a = document
Set repairCon = CreateObject("ComosRepairCon.RepairCon")
repairCon.CheckDocument a

https://support.industry.siemens.com/forum/in/en/posts/how-to-execute-the-check-document-command-from-the-context-menu-in-a-script/238818/?page=0&pageSize=10

Hello Vikash,

Thank you for this!

I did read up on the original post as well and was able to get it to work.

best regards