SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

How to coonect Load cell to two(2) controllers

6/3/2009 3:52 PM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 12/16/2025 Posts: 1197 Rating: (179)	Hello Gosai, The connection is described into the attached file. Best regards Siwarexi Attachment Siwarex_U.JPG (561 Downloads)

Suggestion To thank Quote Answer

6/3/2009 4:13 PM	Rate (0)
Gosai Posts: 61 Rating: (0)	Thank you very much. Last calrification: 1. I have to use signal splitter? as per diagram, not needed. 2. pin no. 14 of SIWAREX need to be connect?? in manual, no description available. Kindly suggest.
Gosai Posts: 61 Rating: (0)
Suggestion To thank Quote Answer

6/4/2009 8:35 AM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 12/16/2025 Posts: 1197 Rating: (179)	Hello Gosai, You don’t need a signal splitter. You can connect the two controllers as described into the diagram. Pin no. 14 of SIWAREX need to be connect! This pin is very important in your case. This pin is the ground of the analog-digital converter of the Siwarex U module. Into a “normal” application, you don’t need to use that pin. Best regards Siwarexi

Suggestion To thank Quote Answer

6/4/2009 9:56 AM	Rate (0)
Gosai Posts: 61 Rating: (0)	Thank u very much. I will test and let u know.
Gosai Posts: 61 Rating: (0)
Suggestion To thank Quote Answer

8/3/2009 8:46 AM	Rate (0)
Gosai Posts: 61 Rating: (0)	Dear Sir, I have make the connections and tested the way u suggested. It works with a problem. Problem is: 1. SIWAREX not showing a steady ( fix) weight. It continuously varying. 2. variation BAND is maximum +20 KG to the value shown by another / existing controller. 3.Client wants fix weight / very less variations. Kindly guide.
Gosai Posts: 61 Rating: (0)
Suggestion To thank Quote Answer

8/20/2009 3:00 PM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 12/16/2025 Posts: 1197 Rating: (179)	Hello Gosai, To your problem: Do you have that behaviour with the continuously varying also with the “normal” connection (I mean: one scale connected to one Siwarex U module)? Did you do an adjustment with the Siwarex U module? Do you have mechanical vibrations? Maybe you can use the parameter “Limit frequency”: If you are decreasing that parameter, you make the scale more “slowly”. I look forward to hearing from you. Best regards Siwarexi

Suggestion To thank Quote Answer

9/2/2009 1:42 PM	Rate (0)
Elan Posts: 2 Rating: (0)	Hai, You are right.By using this Signal multiplier you can multiply the signal without anyloss and it will safegaurd your I/Os.
Elan Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/5/2010 12:10 PM	Rate (0)
Gosai Posts: 61 Rating: (0)	Dear Sir, I am going test again at the end of april. I let you know the result. [schnippschnapp] Regards, Naishad Gosai
Gosai Posts: 61 Rating: (0)	Last edited by: O_Moderator at: 4/6/2010 9:09 AM new question is transferred to following thread /tf/WW/en/Posts/42174#top
Suggestion To thank Quote Answer

Share this page:

Share this page on...