8/5/2021 4:35 PM | |
Joined: 9/27/2006 Last visit: 9/10/2024 Posts: 12282 Rating:
|
Hello Kevin; If I understood what you are trying to do, I think the solution is to ue the "Rewire" function in Step 7. Here is a document showing how to do so with Step 7 v5.x: https://support.industry.siemens.com/cs/ww/en/view/11791432 I have not used Step 7 Professional v1x to rewire addresses in a S7-300, the Step 7 Profssional system manual describes the operation this way: https://support.industry.siemens.com/cs/ww/en/view/109773506/24903260683 Hope this helps, Daniel Chartier |
Last edited by: dchartier at: 08/05/2021 16:42:35 |
|
This contribution was helpful to
1 thankful Users |
8/18/2021 4:10 PM | |
Joined: 2/4/2018 Last visit: 8/21/2024 Posts: 57 Rating:
|
@Daniel Chartier thank you , it helped me a lot. regards KD |
Regards |
|
Follow us on