Dear all,

After installing Step 7 v5.7 on WIN11 and after downloading and installing HW updates from the web, I noticed thta some things are missing in HW catalog that I had in previous Step 7 v5.6 like for example CPU 319-3PN/DP v3.2

Did any of you have the same problems and how it can be fixed?

Thank you all in advance for the help

Hello to all,

At the beginning many thanks for your replys.

I tried to install both version v5.7 and and v5.7 sp3 but the problem remains.

After installation of V5.7 I was not able to open step 7 due to error with automation license manager that was stopped. After installing v5.7 SP3 new automation license manager was installed v6.2 +SP1 and I was able to run step7 normally but still GSD files for many equipment is missing.

Any further suggestion or help would be appriciated.

Thanks in advance

Hello to all,

After many checks and tries problem was solved by manual installation of missing components by installing HW updates from installation disk of step 7 v5.7.

It was seen that not all of the equipmemt was installed during software installation of step 7 v5.7. There was a lot of missing equipment (HW updates) added.

HSP path on installation disc : …\InstData\STEP7\Media\S7HSP

After installation of missing HW updates all equipment is visible in HW catalog.

Thanks again for your help,

BR

Kreso