Hi All,

I need to run a siren using a SIMOCODE  Prov V while using S7-1200. Its start address is Q6.2 and stop address is Q6.1. Ideally when it receives Signal 1 it should go off 3 times, if it receives Signal 2 it should go off 2 times and finally Signal 3 is received it should sound once. Any ideas how you can implement this using ladder logic? 

Thankful for the help!

------------------------------------------------------------------------------------------
Split from how to toggle a bit using ladder logic?.

Topic closed because the question has been posted twice. The active topic can be found here:

Ladder Logic

Kind regards, Moderator_Lan