PC Adapter USB A2 6GK1 571-0BA00-0AA0 has an internal error when I connect.

(An internal error (n_pnp.c(901),0xc0000182,0xf0000) I am using a windows XP via Virtual Box.

Does anyone have a solution for this?

Hello,

which Step7 you have installed in the VM?
Do you use USB 2.0 or USB 3.0 ports to connect the adapter?

Regards

Christoph

My Laptop has both USB 2 and 3 it does the same for both.

The Simatic Version I am using is V5.4 +SP4 revision K5 4.4.0

Thanks

Hi,

do you install the correct drivers for the Adapter?
With Step7 V5.4 you need to install the drivers seperatly.

Regards

Christoph

Hi,

I have installed the drivers from the CD provided with the adapter.

Once installed and VM restarted I plug in the the adapter and the same fault occurs.

Thanks

Hello !

I have the same problem than you ! Have you find a way to connect your adapter without the internal error message ?

I'm using a VM too for WinXP 2002 SP3 and I'd use the CD driver deliver with the adapter without any problem in the installation but it continues to give me the internal error message...

I'm cluless

Thks for the help

H.N.

PC Adapter USB A2 6GK1 571-0BA00-0AA0 has an internal error when I connect.

(An internal error (n_pnp.c(901),0xc0000182,0xf0000) I am using a windows XP via Virtual Box.

Does anyone have a solution for this?

Hi

Enable USB 2.0 controller in virtual PC settings then start it. This method solve my problem in xp virtual pc on windows 7 desktop. both of them are 32bit versions. when i connect PC adapter to host PC and enable it on my virtual PC it doesn't work. before enabling USB 2 there was an error on PC adapter in device manager and it can not start with internal error. it seems to be driver error but by enabling usb 2 the problem disappeared. 

i hope you to be successful man!

mtb4outdoor

Hi

Enable USB 2.0 controller in virtual PC settings then start it. This method solve my problem in xp virtual pc on windows 7 desktop. both of them are 32bit versions. when i connect PC adapter to host PC and enable it on my virtual PC it doesn't work. before enabling USB 2 there was an error on PC adapter in device manager and it can not start with internal error. it seems to be driver error but by enabling usb 2 the problem disappeared. 

i hope you to be successful man!

 Thanks you for your help. 

Hello All,

It looks that this problem has been previously solved by switching from USB1.1 to USB2.0
I am wondering if there is any way to make it work with USB1.1 because i am using Virtualbox, and Siemens prevent us from installing the extension

In the documentation of the USB A2 Adapter, it is stated that it is USB 1.1 compatible.

Thanks

https://support.industry.siemens.com/cs/us/en/view/68849363

On page 9

PhilSiemens1

https://support.industry.siemens.com/cs/us/en/view/68849363

On page 9

 From the same manual, on page 23, you can find the technical specifications:

Hi, I solve this issue installing the Virtualbox extension pack and able the usb 2.0.

Selec the PC Adapter USB A2 again and reinstall the drive.

It worked for me.

Regards,

Setting USB port to 2.0 on Virtual Machine worked.

Thank You