Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
4 Entries
| 9/9/2009 3:04 PM | |
|
Posts: 2 Rating:
|
Please, tell me, where I can find information about cable for THIS type of encoder... |
Last edited by: O_Moderator at: 9/9/2009 3:09 PM |
|
| 9/9/2009 3:21 PM | |
Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating:
|
Hello, Look at 1XP8012-2x TTL 1XP8032-2x TTL Regards |
| 9/9/2009 3:36 PM | |
|
Posts: 2 Rating:
|
Thank you, I have recently read this information. But there is nothing about type and ordering number of cable =( |
| 10/29/2009 3:17 PM | |
|
Posts: 4 Rating:
|
Hello Alexei, the 1xp8 encoder has a 6channel TTL or HTLoutput. If you have the counter connector you can use a cable that has minimum 8 wires, twisted pair and shielded. for exsample Lapp unitronic 300 CY. See datasheet attached Hope that helps klakor AttachmentLapp_PI_302410_DE[1].pdf (1062 Downloads) |
Follow us on