Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIWAREX FTA .GSD

Created by: sakara at: 10/3/2006 3:06 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

10/3/2006 3:06 PM	Rate (0)
sakara Posts: 13 Rating: (0)	Can it be downloaded from site?
sakara Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

10/3/2006 4:18 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/19/2024 Posts: 8770 Rating: (1171)	Hello, When you install the configuration software for Siwarex FTA, it will be possible to choose the Siwarex FTA in the hardware catalog. The configuration software isn't downloadable Hope this helps. Best regards, Wizard

Suggestion To thank Quote Answer

10/3/2006 5:16 PM	Rate (0)
sakara Posts: 13 Rating: (0)	I was told that I dont need siwatool for gsd file. Is it same for SIWAREX U? Thank you for replay.
sakara Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

10/4/2006 9:58 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/19/2024 Posts: 8770 Rating: (1171)	Hello, There is a package Siwarex FTA for Simatic S7: 7MH4 900-2AK01 It contains a Setup for S7-Einbindung from Step 7 v5.2 Also some S7-Function blocks and the software Siwatool FTA. Or are you planning to use the Siwarex FTA on Profibus in combination with another Master? Best regards, Wizard

Suggestion To thank Quote Answer

10/4/2006 11:10 AM	Rate (0)
sakara Posts: 13 Rating: (0)	Hello, I have S7400 and 6 SIWAREX U and 3 SIWAREX FTA in "my" sistem. Thank you for replaying.
sakara Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

10/4/2006 2:11 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/19/2024 Posts: 8770 Rating: (1171)	Hello, There isn't a GSD file for the Siwarex FTA. Also it isn't mentioned in the GSD file for ET200M If you want to be sure about the Configuration software, you should contact Support hotline. They should be able to inform how to act. Good luck, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on