Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Control panel for LOGO!

Created by: jonask at: 7/18/2007 3:15 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

7/18/2007 3:15 PM	Rate (0)
jonask Posts: 4 Rating: (0)	Hi! I am a guy from Sweden who is building a smal automation system at home. Im using an Siemens LOGO! basic PLC together with 2 expansion modules to control light and security systems through out my house. However I would like to expand my system and put up displays in some of my rooms where I can control status of my system and sensors and also change options. I noticed that for Simatic there is a display called Siemens TP 177Micro Touchpanel. I was woundering if there is any product similar to this that will work together with the logo? If there is who do you program this device, directly on the display or threw software on the computer?`Where can I buy it? Is it possible to connect more than one display?. Thanks Jonas Kristensson
jonask Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

7/18/2007 3:23 PM	Rate (0)
STOKIE Posts: 10 Rating: (4)	Within the current product range of the Logo! there is no seperate HMI. The TP177 Micro is for the S7-200 range of PLC.
STOKIE Posts: 10 Rating: (4)
Suggestion To thank Quote Answer

7/18/2007 3:28 PM	Rate (0)
jonask Posts: 4 Rating: (0)	Ok! Do You have any other ideas how I should be able to develop my ideas? Should i switch my PLC range? Basically because I am building this for private use i dont want to spend to much money. What do you sugest I do? I thank you for all the help I can get. Jonas Kristensson
jonask Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

7/18/2007 4:24 PM	Rate (0)
SPAINLOGO Posts: 26 Rating: (0)	Estimated friend "jonask": In my opinion you must use the standard KNX/ EIB module to SIEMENS LOGO! and late you can connect all the element for this standard, tactil panels, weather station, etc. Standard KNX/EIB it is an international ( allthe important trademarks made productscompatible with this standar ABB, Theben, etc)standar to domotic house or public applications, you can know more about it in the web page(www.eiba.de). I tyhing that it is perfect solution of the problem do you want to resolve, and to teh apllication do you want to make. I have a lot of experience with this standar , if you want I can help you. Best Regards.
SPAINLOGO Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

7/18/2007 4:49 PM	Rate (0)
jonask Posts: 4 Rating: (0)	Hello! Thanks for your answer! Ok, I see. So basically this device is a device where you can connect several modules. For example a weather station to interact with your PLC? but is it possible to connect a control panel to this device aswell? Do you have any sugestions for a control panel that would fit? Do you have any schematics of a system using this device in this way? Jonas Kristensson
jonask Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

8/1/2007 1:41 PM	Rate (0)
Lifrasil Bronze Member Joined: 9/29/2005 Last visit: 11/15/2024 Posts: 313 Rating: (24)	Hi jonask, as spainlogo already wrote, at the moment you have no chance to use any hmi-device with display for the logo modules except the logo with integrated display itself. of course there is the possibility to use KNX/EIB extension module and add some hmi devices from this list. EIB_HMI_devices If you like them you can find some more information to EIB under following applications: Set8 Set28 But in general i would suggest you to think about if its not too late to switch to s7-200 visualization is simple more easier there than on logo side. Any help which fit to your expectations here? best regards Lifrasil

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on