Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Mag 5000

Created by: Mkulmx at: 8/10/2007 8:04 AM (6 Replies)

Rating (1)

Thanks 0

7 Entries

8/10/2007 8:04 AM	Rate (0)
Mkulmx Posts: 22 Rating: (0)	Good afternoon The flowmeter "Magflo" the module of management "MAG 5000" at inclusion of the device dies away LCD current an output absent. Where to find the electric scheme on the device "MAG 5000" Thanks
Mkulmx Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

8/10/2007 8:48 AM	Rate (1)
Chook Experienced Member Joined: 6/13/2006 Last visit: 9/21/2023 Posts: 201 Rating: (8)	Hello , Yourflow transmitter does not display that could be a over voltage from yourpower sourceor bythe water damage. regards chook
	[IMG]http://i17.tinypic.com/66b7jas.jpg[/IMG]
Suggestion To thank Quote Answer

8/10/2007 9:08 AM	Rate (0)
Mkulmx Posts: 22 Rating: (0)	Where to find the electric scheme on the device "MAG 5000" Thanks
Mkulmx Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

8/10/2007 9:20 AM	Rate (0)
Chook Experienced Member Joined: 6/13/2006 Last visit: 9/21/2023 Posts: 201 Rating: (8)	Do you mean the circuit diagram of mag 5000 ? Sorry the factory won't support the circuit layout. regards chook
	[IMG]http://i17.tinypic.com/66b7jas.jpg[/IMG]
Suggestion To thank Quote Answer

8/10/2007 11:43 AM	Rate (0)
Mkulmx Posts: 22 Rating: (0)	I wish to repair independently " Mag 5000 "
Mkulmx Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

9/3/2007 1:08 PM	Rate (0)
Woja Posts: 18 Rating: (1)	Hello ! In MAG series of converters there is one capacitor on secondary side of flyback converter that is undersized and it happens that it dries. In more then 10 units we've changed 47uF capacitor located near TOP integrated circuit and everything workes like a charm after that. Best regards, Woja.
Woja Posts: 18 Rating: (1)
Suggestion To thank Quote Answer

9/4/2007 2:13 AM	Rate (0)
Chook Experienced Member Joined: 6/13/2006 Last visit: 9/21/2023 Posts: 201 Rating: (8)	Hello, The new Siemens Mag5000&6000 ( 7ME6910/7ME6920 ) which cannot replace the cap47uf. I triedmore than 20 units but still doesn't work. Please note that ifyourtransmitters have a digital outputerror , don't try to repair because thefailures from IC chips. The bestsolutionis replacing a new transmitter. Regards chook
	Last edited by: Chook at: 04.09.2007 02:22 [IMG]http://i17.tinypic.com/66b7jas.jpg[/IMG]
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on