Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

How many slave devices able to connected by LOGO! CIM?

Created by: AutoGen_2171167 at: 12/26/2022 7:34 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

12/26/2022 7:34 AM	Rate (0)
AutoGen_2171167 Member Joined: 12/13/2016 Last visit: 1/17/2025 Posts: 14 Rating: (1)	How many slave devices able to connected by LOGO! CIM using MODBUS RTU [RS485]. When LOGO! CIM is Master.

Suggestion To thank Quote Answer

12/26/2022 10:57 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 12/24/2025 Posts: 36369 Rating: (4543)	Take a look at the manual, page 64. Attachment LOGO! CIM Operating manual edition 2022_09 page 64.pdf (922 Downloads)

Suggestion To thank Quote Answer

12/28/2022 3:47 AM	Rate (0)
AutoGen_2171167 Member Joined: 12/13/2016 Last visit: 1/17/2025 Posts: 14 Rating: (1)	Then how many slave devices for 1 network?

Suggestion To thank Quote Answer

10/23/2023 9:44 PM	Rate (0)
DavidRoncacci Posts: 1 Rating: (0)	the information is not clear. I read somewhere that 32 slaves can be connected, but in practice no more than 16 rows can be added. one line does not allow you to configure more than one slave. It's very limiting
DavidRoncacci Posts: 1 Rating: (0)	Last edited by: DavidRoncacci at: 10/23/2023 21:45:27
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ilmarix

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on