Navigation

Backup USB KTP400F Mobile

Created by: stefan_ss at: 10/16/2024 7:49 AM (1 Replies)

10/16/2024 7:49 AM	Rate (0)
stefan_ss Regular Member Joined: 9/25/2015 Last visit: 10/29/2025 Posts: 4 Rating: (0)	Hi, I am trying to backup data from HMI to USB but I cannot make it to work. It works in simulated panel on computer. I use a script to create a file and then try to save it on the USB but no file is created. As I can see I use the correct path but I am not certain. Has anyone some experience how to solve this? //Script I am using foldername = "\USB_X61\"'"C:\USB_X61\" filename = "program.csv" If Not obj.FolderExists(foldername) Then obj.CreateFolder(foldername) End If If Not obj.FileExists(foldername+filename) Then obj.CreateTextFile foldername+filename End If name = "Name" strData = name For i = 0 To 40 strData = strData + ";Type" + CStr(i) strData = strData + ";Rotation" + CStr(i) strData = strData + ";Height" + CStr(i) Next Set file = obj.OpenTextFile(foldername+filename, ForWriting) file.WriteLine(strData) file.Close() strData = "" Set file = Nothing Best regards Stefan

Suggestion To thank Quote Answer

10/16/2024 8:48 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 12/19/2025 Posts: 16612 Rating: (1943)	Hello stefanafry WindowsCE uses other functions for file access and for filesystem access than Windows PC based systems. So if you use a Script that works on PC it will not work on Panel. Check these two FAQs one for WinCE Panel: https://support.industry.siemens.com/cs/ww/en/view/59604194 Windows PC (also simulation!): https://support.industry.siemens.com/cs/ww/en/view/106501825 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer