10/3/2021 9:53 PM | |
Joined: 7/26/2021 Last visit: 11/21/2023 Posts: 27 Rating: (0) |
Making a ported cylinder part in my DMG DMC103V. Tried programing a simple polar pocket with repeats. The A rotary axis moves at 16 deg per minute. Way too slow. I ended up making a contour polar path stopping near the inside diameter so I could punch out the slug. Speed works ok in that mode. Id like to know what is wrong with my code so I can have my post guy reconfigure the post. Anyone know what's going on? [snip]
AttachmentFiles.zip (164 Downloads) |
Last edited by: Jen_Moderator at: 10/04/2021 12:17:25Added code and image as a zip file. |
|
10/3/2021 10:58 PM | |
Joined: 7/26/2021 Last visit: 11/21/2023 Posts: 27 Rating: (0) |
My 840D does not recognize the G700 command. Gets a 12470 error. |
Last edited by: edijuh at: 10/03/2021 22:58:26 |
|
Follow us on