7/23/2022 6:34 PM | |
Joined: 8/3/2021 Last visit: 7/23/2022 Posts: 26 Rating: (0) |
Hi all, I have been called to site on the Sinumerik 802D sl system to find the 207841 fault code. The machine boots up ok, the operator then selects his program of which there are only 3 as they machine the same product over and over. He starts the program and as the machine finishes the cut and the machine starts to run down then this 207841 alarm occurs. The operator then turns off the machine, re starts it and starts again. Thank you for any help ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 07/25/2022 06:06:48New subject after splitting |
|
7/25/2022 6:08 AM | |
Joined: 6/19/2017 Last visit: 5/17/2024 Posts: 8034 Rating: (164) |
Closed cause question posted twice. The second thread with the subject Sinumerik 802D SL system is published within the conference SINUMERIK CNC automation systems. Best regards, |
My Forum is the place to personalize your profile, |
|
Follow us on