12/9/2019 12:24 PM | |
Joined: 7/13/2017 Last visit: 7/31/2024 Posts: 18 Rating:
|
Hi, Thanks for replying Piscean 2010, I checked the power cable and that was fine, while the spindle was running I checked the encoder cable and it stopped the spindle when I moved the cable, so that's at fault. I am now needing a 5m encoder cable for the following Siemens motor - 3 Phase 1PH7 184-2NB00-0EA1. Encoder ERN1387. Code NR 419. Cheers, David. AttachmentSiemens Motor 01.docx (77 Downloads) |
12/11/2019 12:05 PM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating:
|
Hello, I am not Siemens official Please contact your nearest Siemens service/support center/office & send official enquiry. You can find your nearest Siemens office address here. I guess since this is dicontinued product, you may check its availability on internet like ebay or amazon etc. etc. PLEASE REFER CORRECTED MLFB number in my previous post |
Last edited by: PISCEAN 2010 at: 12/11/2019 12:08:44Last edited by: PISCEAN 2010 at: 12/11/2019 12:14:46Corrected MLFB number instrunction added Last edited by: Jen_Moderator at: 12/12/2019 08:36:18Removed E-Mail address. |
|
Follow us on