12/26/2023 6:59 PM | |
Joined: 5/6/2010 Last visit: 8/26/2024 Posts: 1977 Rating:
|
Hello plcspace, I have a look at a few "old" documentations. If I read it correct you must move the cursor under the output and then you should press "Shift F4". Then you can select the jump then you can write the label name over the output. I hope this is a little bit more helpful. There aa link to a document in German language: https://www.sps-lehrgang.de/sprungfunktionen-in-kop/ At the follow link you can find some information's about Step5 regards |
12/29/2023 12:47 PM | |
Joined: 12/29/2023 Last visit: 12/29/2023 Posts: 3 Rating:
|
your welcome |
1/12/2024 8:27 AM | |
Joined: 3/6/2020 Last visit: 8/21/2024 Posts: 35 Rating:
|
Hello CaOd, Could you upload this a few "old" documentations ? |
3/18/2024 4:24 AM | |
Joined: 3/6/2020 Last visit: 8/21/2024 Posts: 35 Rating:
|
Hello CaOd, Yes, i would like "translate" this code from STL to LAD. Could you make some photo "how do it" step by step ? |
Follow us on