Navigation
Rating 
Thanks 0
2 Entries
| 11/30/2011 10:51 PM | |
|
Posts: 1 Rating:
|
I have an old Simatic TI335 cpu that the run light will not come on. Any Ideas? |
| 12/1/2011 2:43 PM | |
|
Posts: 510 Rating:
|
If the PLC won't go into RUN mode then you have an error. If you have a copy of the program I would try to clear the PLC memory and download the program. If this does not fix the problem,the TI 335 wasprivate labeled from Koyo. Automation Direct handlesKoyo products today http://www.automationdirect.com/adc/Home/Home Although the 335 is no longer available, they may have a suitable replacement. Good Luck billwest |
Follow us on