Navigation
Rating 
Thanks 2
4 Entries
| 3/27/2012 12:05 PM | |
Joined: 9/23/2005 Last visit: 11/13/2024 Posts: 4352 Rating:
|
Hi, first to instal V11, have you alread installed WinCC flexible? Witch version? It works? |
|
Denilson Pegaia |
|
This contribution was helpful to
|
|
| 3/27/2012 12:09 PM | |
Joined: 5/12/2008 Last visit: 10/18/2023 Posts: 5 Rating:
|
I have WinCCFlexible 2008 sp1...and mi operating system is Windows7 Ultiamte...could be compatibility problem? |
| 3/27/2012 12:55 PM | |
Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating:
|
Hello Monserrate, Check the compatibilty from here - With what are SIMATIC WinCC flexible 2008, 2007, 2005 and 2004 compatible? WinCC Flexible 2008 SP1 and Windows 7 Ultimate is not compatible. You need WinCC Flexible 2008 SP2 to do the migration to WinCC v11. Check this webcast on How do you migrate a WinCC flexible 2008 project to WinCC V11 (TIA Portal)? |
|
Like it? Rate it! |
|
This contribution was helpful to
|
|
Follow us on