5/14/2013 7:43 AM | |
Joined: 4/22/2010 Last visit: 5/3/2024 Posts: 5697 Rating: (715) |
Hello, Maybe this FAQ can help you: Why is the connection interrupted while transferring a project with ProTool to an OP? Regards, Marcjan |
Problem solved? |
|
5/17/2013 2:32 AM | |
Joined: 5/14/2013 Last visit: 9/7/2024 Posts: 2 Rating: (0) |
Thanks, but still same problem, can start transfer but will stop in the middle . |
5/17/2013 2:01 PM | |
Posts: 3037 Rating: (192)
|
Hello Have a look to the links: /tf/WW/en/Posts/9785 /tf/WW/en/Posts/77269 Tweety |
5/17/2013 3:06 PM | |
Joined: 1/21/2013 Last visit: 9/4/2024 Posts: 4620 Rating: (707) |
Hi AutoGen_484070 Usually with this problem you need to do to repair the HMI. It has already happened to me |
Follow us on