5/14/2015 3:04 PM | |
Joined: 1/21/2013 Last visit: 6/6/2024 Posts: 4620 Rating:
|
Hello Aslaan, Sorry for the late reply My Schneider friend gave me these 3 codes (below) to communicate between Schneider PLC, and Siemens panel. They explained to me that basically you have to create a Modbus node (Schneider side) which they call "Unitelway node" that then with these accessories you can communicate via Modbus. After this they stopped because they do not know the "Siemens side" if the panel can communicate via Modbus etc. Meanwhile please read these articles, because the impression that I have is missing the communication cable from SCA 50 (last devices Modbus side) "Schneider-Siemens panel" but I think the problem is minor. You can navigate the Schneider site with these codes if you want more information: Please have a look: TSX SCP114 UNI-TELWAY V1.1 ie02 SCP114 Driver for Win 95 98 NT4 2000 XP TSX SCPCM4030 TSXSCPCM4030 Connection to the 2 Wire ... - Schneider Electric TSX SCA50 Connection to the 2 Wire Modbus/Jbus RS 485 ... - Schneider Electric Overview of the three components: Page 261 - Schneider Electric Modicon Premium Automation ... and have a look this thread, is possible that help you for last connection from Modbus to Panel "Sandman post" Configuring a Comfort TP900 as Modbus Master ... - Siemens
|
Last edited by: Ste39 at: 5/14/2015 3:08:54 PMLast edited by: Ste39 at: 5/14/2015 3:30:57 PM |
|
10/2/2017 9:40 AM | |
Joined: 6/24/2015 Last visit: 6/5/2024 Posts: 10 Rating:
|
Sir, The link 8.6Description of the ports not opens, can you give me details if you have? |
Follow us on