Hi.

I hope someone is able to help me out. I have connected my USB LTF cable to my IO-Master and the other side in my laptop. This is working perfectly fine on the Balluff UHF Manager. If I try to scan my cards they show up in the UHF Manager. Now this is what I need: If I scan one card, there needs to be a bit set to HIGH. If this bit is set to high there will be a robot that executes a program based on the RFID card/tag. So I have 5 cards, every card is a different program. 

After I have scanned the RFID tag, how do I get this value in TIA Portal to be HIGH? Do I have to create like a block to scan the RFID tags? I am a complete beginner using RFID cards/tags so every help is useful. I also have trouble scanning cards without using UHF Manager. The IO Link Master is connected to my IO Link Master. I can't find any YouTube video or any related topics on Google nor on the Siemens support website.

My RFID scanner is: Balluff BIS015Z BIS VU-320-C0-S4

My IO-Master is: BIS V-6108-048. 

Using S7-1500 on TIA Portal V16.

IOLinkMaster -> RFID Head I/O 16byte_1 -> I address 11....26 and Q address is 11....26.