Duris_I

Hello,

really I don't know what to say, people want in this era that we give all to their hands so they really don't need to do anything

So you said that you've found nothing in that document, it takes to me few seconds:

ok now to that registers and access system. look again to that screenshot. there you have all data you need set in your block, you show that with yellow color, thesea re that data you need set to your Client block.

You need look at TIA portal Help about Client block to understand what f.ex. MODE 103 means, look at LEN and start to be familiar with that. On other side, that Server ID isn't on your screenshot, it need be set also prior start comm.

I said there isnt about register addressing 

every body knows by calling  companies support we can get some data 

before living in iran dont judgment us beacuse everything is boykote

so connection by companies is hard way often

Hello,

ok, I was expected some constructive feedback with understanding that I spend my time in your Topic, then some not depended to problem answers are posted that no one here can solve for you and you're responsible to communicate clearly here. Ok, if I don't have any access due my Country system, I describe this kindly and logically inside post (Very sry, I don't have access to outside due my Country system), I think that every one here will understand that, correct? How then we can know what problem you have? Very sry, I'm closing support here, I expect now some correct feedback because this is non sence simply, very sry...

Duris_I

Hello,

ok, I was expected some constructive feedback with understanding that I spend my time in your Topic, then some not depended to problem answers are posted that no one here can solve for you and you're responsible to communicate clearly here. Ok, if I don't have any access due my Country system, I describe this kindly and logically inside post (Very sry, I don't have access to outside due my Country system), I think that every one here will understand that, correct? How then we can know what problem you have? Very sry, I'm closing support here, I expect now some correct feedback because this is non sence simply, very sry...

 ok, anyway thank you for ur help

I found the explanation, I will upload it,

maybe it will be useful for those who had the same problem

Hello,

no problem with help. On other side your PDF document isn't that helpful, really not, it is only basic information about some specification but how that Modbus is implemented and what exactly cfg is required (also what you require about registers), is missing there.

So again pls, do you request some other help here? It is clear now, you can do tests very easy with that my red color data rectangles, you said that this is working from previous prj but also this can't be true actually because of different cfg right at device, who knows.

Duris_I

Hello,

no problem with help. On other side your PDF document isn't that helpful, really not, it is only basic information about some specification but how that Modbus is implemented and what exactly cfg is required (also what you require about registers), is missing there.

So again pls, do you request some other help here? It is clear now, you can do tests very easy with that my red color data rectangles, you said that this is working from previous prj but also this can't be true actually because of different cfg right at device, who knows.

 I try to find better document to share 

just guide to confiussing sources isnt helpfull ***

Hello,

ok I'll try to help but will wait for that you'll rate all my knowledge helpful posts to you, they are very helpful for knowledge, aren't they? Or I need solve your prj instead of you so you can give rating to my posts then? Ok, better to go to problem with understanding your questions. As I said, you have there all parameters what you  need set to Client block - MODE, DATA, and LEN. Really I don't know why you still don't understand what you need to do, I've recommended to look at TIA help about Client block to read there what that parameters are. It is not effort to write here hundreds of posts with teaching you, you need to do that steps and configure all. If you don't understand to problematic then hurry to learn about basic of programming and especially communications, better also Modbus because really no one here will teach you. We can give you only some recommendations, tips that can depends to all what you did with cfg, programming. Other questions you have?

Duris_I

Hello,

ok I'll try to help but will wait for that you'll rate all my knowledge helpful posts to you, they are very helpful for knowledge, aren't they? Or I need solve your prj instead of you so you can give rating to my posts then? Ok, better to go to problem with understanding your questions. As I said, you have there all parameters what you  need set to Client block - MODE, DATA, and LEN. Really I don't know why you still don't understand what you need to do, I've recommended to look at TIA help about Client block to read there what that parameters are. It is not effort to write here hundreds of posts with teaching you, you need to do that steps and configure all. If you don't understand to problematic then hurry to learn about basic of programming and especially communications, better also Modbus because really no one here will teach you. We can give you only some recommendations, tips that can depends to all what you did with cfg, programming. Other questions you have?

 Maybe the reason you didn't understand

my question is because of its translation,

otherwise I don't think a normal person

couldnt understand my question.

I have no problem with plc, I just need the number of

registers in dse7420 to read dse data.

Hello,

I have no problem with plc, I just need the number of

registers in dse7420 to read dse data.

Ok, definitelly I leave you in other users hands...

hello every one

in the attach file you can find register address for reading dse7420 data 

thank u doris for motivating me to solve my problem myself​

To calculate the register address, multiply the page number with 256 and then add the register offset. 256 x 4 + offset

For Oil Pressure the register address is = 1024

Coolant Temp= 1025

.
.
.​