3/31/2019 11:51 AM | |
Joined: 2/22/2008 Last visit: 6/12/2024 Posts: 2698 Rating:
|
You can try to setup the Logo as server, if your Modbus doctor is able to serve as client. This is just to get any Modbus communication to your Logo for a test phase. If you are able to communicate anything, then try the next step and change client and server side. One thing i have read in your sma description, for sun spec you have to add +123 to the id, but i don't know, if this apply to your application. You also can test something if have described in the german forum, but i can not translate everything. https://support.industry.siemens.com/tf/ww/de/posts/logo-8-modbus/181646?page=1&pageSize=10 Regards, Scorp |
Follow us on