Navigation
Rating 
Thanks 0
9 Entries
| 7/29/2022 5:31 AM | |
Joined: 12/18/2014 Last visit: 9/3/2025 Posts: 35917 Rating:
|
I'm sorry but I don't understand what you mean. |
| 7/29/2022 5:53 AM | |
|
Joined: 12/18/2014 Last visit: 9/3/2025 Posts: 35917 Rating:
|
Do you want to save the 1-signal state of a button in a non-volatile manner? |
| 7/29/2022 1:15 PM | |
|
Posts: 6 Rating:
|
Yes But this button is not hardware. This button is available in the software and its status is selected by the operator through the LOGO display.
|
| 7/29/2022 1:17 PM | |
|
Joined: 12/18/2014 Last visit: 9/3/2025 Posts: 35917 Rating:
|
Do you mean a softkey in the LSC software? |
| 7/29/2022 1:28 PM | |
|
Posts: 6 Rating:
|
Yes |
| 7/29/2022 1:46 PM | |
|
Joined: 12/18/2014 Last visit: 9/3/2025 Posts: 35917 Rating:
|
And in which mode use you the softkey? As button or switch? |
| 7/29/2022 1:55 PM | |
|
Joined: 12/18/2014 Last visit: 9/3/2025 Posts: 35917 Rating:
|
Set the retentivity in the block properties. |
| 7/29/2022 2:03 PM | |
|
Posts: 6 Rating:
|
As button |
Follow us on