Hi..

I am facing issue in running project please anyone help me....

I connected the 4-20 mA  PMC21-1U56/0 Vacuum sensor with 6es7134-4gb01-0ab0 (2 AI-Current type ) and i got value from sensor on the AI module 31054 (Like-Overflow) Please share me overflow

reason and solution....

Thanks

Hi,

Please share the wiring connection diagram.

Regards,

Thank you so much for reply..

Please find in attached file for module and sensor connection and also please 

help me.

Hi,

Have you checked 4-20mA in sensor output.

Regards,

 Hello,

#Ak

Hi..

I am facing issue in running project please anyone help me....

I connected the 4-20 mA  PMC21-1U56/0 Vacuum sensor with 6es7134-4gb01-0ab0 (2 AI-Current type ) and i got value from sensor on the AI module 31054 (Like-Overflow) Please share me overflow

reason and solution....

Thanks

 for first one tip for future, you can easy ZIP screenshots and attach ZIP file here, it's better than click to different posts again to see screenshots. Next tip as already sugested, due documentation to sensor connect power supply required and check with multimeter output of sensor to be sure about problem. Next tip, you need correctly set ET AI module for proper current range and download cfg to take effect but check of output of sensor is first required step. Some sensors requires for first set them to some settings/range prior put them in process so check also this if it requires that - manufacturer documentation.