I am trying to send Setpoint command from SICAM SCC but the value of the command is always 0 no matter which value I set in command.

I use a button with C script to send it

void PAS_Command_Float_V500(char* p_cTagName, float p_fValue, DWORD p_dwValueType, DWORD p_dwDuration)

char* p_cTagName I set my TAG for this setpoint command,

float p_fvalue I have tried to set I number (77) or internal float tag.

DWORD p_dwValueType I put 22 according to manual this is Setpoint analog, floating point

DWORD p_dwDuration I tried to set 0 or 5

SICAM SCC sends value but value is always 0.

Has anyone experience with this?

Hi Mike,

this SCC is connected to AK 1703 via IEC 104 so I dont have value viewer.
I dont use SICAM PAS here.
But in Data flow of AK I can see that AK receive this command but value is 0.

Also in wireshark I can see that value is 0.

I have also tested with decimal point but no use.

Best Regards
Ensar

Solved Mike.
Use different TI.