Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

accesing STEP7 data block variables in WinCC

Created by: rovist at: 6/12/2006 4:32 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/12/2006 4:32 AM	Rate (0)
rovist Regular Member Joined: 6/4/2006 Last visit: 8/22/2024 Posts: 17 Rating: (0)	Hello I have problem about transfering DB (instance data block) from Step 7 to WINCC external tags. Anyone can help to solve my problem?? I tried using Shared DB and Step 7 Symbol transfer and it can transfer normally. Thanks. Rovist

Suggestion To thank Quote Answer

6/12/2006 11:02 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, I am not too sure where you problem may be, but perhaps this FAQ will help? http://support.automation.siemens.com/WW/view/en/22727527 http://support.automation.siemens.com/WW/view/en/14054155 http://support.automation.siemens.com/WW/view/en/22062395 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/13/2006 9:35 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	Also maybe this FAQ will help - http://support.automation.siemens.com/WW/view/en/22062395

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on