Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Run a project with two different MPI board

Created by: Kramps at: 6/20/2006 8:25 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

6/20/2006 8:25 AM	Rate (0)
Kramps Posts: 66 Rating: (2)	Hi, I developped a project on a office computer communicating with the automat with a CP5611 board, which worked fine. For testing purpose, I would like to run now my project on a laptop, using a PC Adapter USB cable. The project works on the new PC but i didn't manage to make it communicate with the automat. I used the tool "channel diagnosis" which indicates me a 4262 Error type which said me that the communication was not well parametred in the control panel item "Configuration of the PG/PC interface", which seems to me OK. I really don't understand the problem because when I created a new simple project using only one external variable,Imanaged to communicate. Any Idea ? Thanks Kramps
Kramps Posts: 66 Rating: (2)
Suggestion To thank Quote Answer

6/20/2006 8:57 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, is STEP7 installed on your PC as well? => Can you change S7-CPUvalues via STEP7? http://support.automation.siemens.com/WW/view/en/12125202 http://support.automation.siemens.com/WW/view/en/264695 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/20/2006 9:07 AM	Rate (0)
Kramps Posts: 66 Rating: (2)	Thanks. Where do i find the system parameter unit window ?
Kramps Posts: 66 Rating: (2)
Suggestion To thank Quote Answer

6/20/2006 9:23 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, you can find it here: "WinCC > TagManagment > SIMATIC S7 Protocol Suite > MPI > "right mouse click"" => have a try with different logical devices [:D] nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/26/2006 10:16 AM	Rate (0)
Kramps Posts: 66 Rating: (2)	Hi, I forgot to thank you about that.[:P] When I change this parameter, all turns out to work very well on my laptop. Regards, Kramps.
Kramps Posts: 66 Rating: (2)
Suggestion To thank Quote Answer

6/26/2006 10:41 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	you are welcome [:D], great that you are "online" now
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on