Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP524 communication with WinCC

Created by: DINARAI at: 6/28/2006 7:12 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/28/2006 7:12 AM	Rate (0)
DINARAI Posts: 1 Rating: (0)	I need connect WinCC to two S5 PLC with CP524. 1)Is that possible? 2)What kind of addressing should I impelement? 3)Which .CHN file in WinCC support the communication? 4)Is any special cable neccessary? 5)Recommendations? thanks
DINARAI Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

6/29/2006 11:05 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, starting with WinCC V6 this S5-channel is sold/supported by WinCC Center of Competence in Erlangen: http://www.industry.siemens.de/IT4Industry/EN/SOLUTION_SERVICES/SIMATIC_ADDONS/KANAL.HTM it4industry@siemens.com +49 9131 7 46111 +49 9131 7 44757 P.O.Box 3240, 91050 Erlangen GERMANY nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/30/2006 9:23 AM	Rate (0)
Charly Member Joined: 6/30/2006 Last visit: 6/30/2006 Posts: 1 Rating: (0)	[:D]For connecting SIMATIC S5 to WinCC with S5PMC-channel please contact: WinCC Center of Competence in Erlangen: it4industry@siemens.com +49 9131 7 46111 +49 9131 7 44757 P.O.Box 3240, 91050 Erlangen GERMANY You can download information: http://www.industry.siemens.de/IT4Industry/EN/SOLUTION_SERVICES/SIMATIC_ADDONS/kanal_download.htm Attachment WinCC_Channels_e.pdf (412 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on