Hello OleTFL,

Integrating the SM 335 analog module (6ES7 335-7HG02-0AB0) into a SIMATIC PCS 7 V8.0 system requires ensuring that your hardware catalog is up to date. This module was supported in earlier versions, such as PCS 7 V7.1, but may not appear in the hardware catalog of PCS 7 V8.0 without the necessary updates.

Steps to Integrate the SM 335 Module:

1. Update the Hardware Catalog:

   • Siemens provides Hardware Upgrade Packages (HUP) to update the hardware catalog in PCS 7 systems. For PCS 7 V8.0, you should look for the appropriate HUP that includes support for the SM 335 module. For instance, the V8.2 Hardware Upgrade Package 0261 (HUP 0261) includes updates for certain modules
     Siemens Industry Support . Although this is for V8.2, similar packages exist for V8.0.

2. Check Compatibility:

   • Before proceeding, verify the compatibility of the SM 335 module with PCS 7 V8.0 using Siemens' Compatibility Tool Siemens Industry Support . This tool helps determine if the module is supported in your system version.

3. Download and Install the HUP:

   • Visit the Siemens Industry Online Support website and search for the Hardware Upgrade Package corresponding to PCS 7 V8.0.
   • Download the HUP and follow the installation instructions provided in the accompanying readme file.

4. Update the Hardware Configuration:

   • After installing the HUP, restart the HW Config tool in PCS 7.
   • The SM 335 module should now be available in the hardware catalog for integration into your project.

Additional Considerations:

• Product Lifecycle: Be aware that the SM 335 module (6ES7 335-7HG02-0AB0) has been marked for product cancellation since October 1, 2024

  Siemens Industry Mall  Ensure that using this module aligns with your project's lifecycle and support requirements.

• Alternative Solutions: If updating the hardware catalog does not resolve the issue, consider consulting Siemens support or exploring alternative modules that offer similar functionality and are supported in PCS 7 V8.0.

By following these steps, you should be able to integrate the SM 335 module into your PCS 7 V8.0 system