SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

T300 memory

11/19/2022 4:38 AM	Rate (0)
mnz12345 Posts: 12 Rating: (0)	How can I replace the memory of t300 with new one When we do that we have problem with connection the drive Attachment IMG_20221119_065636.jpg (791 Downloads)
mnz12345 Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

11/21/2022 5:25 PM	Rate (0)
mnz12345 Posts: 12 Rating: (0)	Dear How can I replace the memory of T300 with new one and set the parameter on the new one Any advice pls
mnz12345 Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

11/30/2022 7:29 PM	Rate (0)
Sinex1 Regular Member Joined: 4/20/2009 Last visit: 11/18/2025 Posts: 20 Rating: (4)	Hello, There are 2 possibilities : you have a standard software (for example winder, angular synchronism, positioning), or you are using a free programmed technology board. If there is standard software, you need a standard eprom with the software package factory default installed on it. If you have a free programmed technology board, you will need a special eprom-writing device... Today, you will need to look hard to find it...... it's old, and mostly with parallel port interface and old operating system.... You will also need the source for the programmation... it is not possible to recover it from the original eprom... Even if you find the eprom writing device, it will take you longtime before you will succeed in writing the eprom.... That's my experience... It is urgently recommended to upgrade this T300 board, with some other technology device.

Suggestion To thank Quote Answer

12/15/2022 4:42 PM	Rate (0)
mnz12345 Posts: 12 Rating: (0)	Sinex1 Hello, There are 2 possibilities : you have a standard software (for example winder, angular synchronism, positioning), or you are using a free programmed technology board. If there is standard software, you need a standard eprom with the software package factory default installed on it. If you have a free programmed technology board, you will need a special eprom-writing device... Today, you will need to look hard to find it...... it's old, and mostly with parallel port interface and old operating system.... You will also need the source for the programmation... it is not possible to recover it from the original eprom... Even if you find the eprom writing device, it will take you longtime before you will succeed in writing the eprom.... That's my experience... It is urgently recommended to upgrade this T300 board, with some other technology device. Many thanks We have free parameter Ms300 with hoisting gear v1.22 how can we replace it with new one
mnz12345 Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

Share this page:

Share this page on...