Hi everyone

So I am new in this forum as well in logosoft. I am tryin to learn from your experts how to program and use PLC. Until now i felt ok,but.  I am working on budget frendly monitoring project. Basically, I would like to have PLC inputs to send email to me regarding machine monitoring. My issues.

1. Router hardware and setup for PLC to use.

2. Program diagram just a one input, i should e able to figure out rest. (I have tried so many options to write program myself but absolutely no luck)

Thank you ahead

My bad I wasnt sure if anyone will answer as topic i older.

I have Logosoft 8.4 and PLC 0AB2 new just purchased from supplier. Learning on the go here, I used Zelio PLC before but they have discontinued modules for internet and wifi. I have seen through some research that siemens logoPLC can be configured to do same but for me is somehow very difficult to write the program. If someone can help write only for one input , the rest of inputs I can figure out, hopefully, if not too much to ask.

Thanks

Hello, 

How can I contact you. 

I am wondering if you can help me, I have placed an issue in few topics but I cant find them, you have mention on one of them that I have reposed this issue somewhere else too. I am new in this forums and Siemens PLC programming.  I am trying to learn from your experts how to program and use PLC.

I am working on budget friendly monitoring project. Basically, I would like to have PLC inputs to send email to me regarding machine monitoring. My issues.

1. Router hardware and setup for PLC to use. I purchased sim card capable H927ProRouter, wanted to have stand alone internet just in case if WIFI not available.

2. Program diagram. (I have tried so many options to write program myself but absolutely no luck. I have been reading and going through videos for more than a 10 days now, but nowhere to be found anything what would help assembling something for my use.

I have Logosoft 8.4 and PLC 0AB2 new just purchased from supplier. Learning on the go here, I used Zelio PLC before but they have discontinued modules for internet and wifi. I have seen through some research that siemens logoPLC can be configured to do same but for me is somehow very difficult to write the program. If someone can help write program,  if not too much to ask.

Sequence of work,

Input I1 energized-send email or SMS or both to myself.  I might use 6 inputs.

Thank you