Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP270

Created by: Evelyne at: 5/15/2006 1:00 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

5/15/2006 1:00 PM	Rate (0)
Evelyne Posts: 28 Rating: (0)	Hi is it possible to hide buttons that are not accessible due to a too low user level with a TP270 that's configured with ProTool/Pro V6.0 SP2 ? If yes, how ? I have 1 fixed window above. Can I make a second one beneath? If yes, how ? Thanks, Evelyne
Evelyne Posts: 28 Rating: (0)
Suggestion To thank Quote Answer

5/15/2006 3:11 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/15/2024 Posts: 8768 Rating: (1171)	Hi Evelyne, I think it's possible to hide a button, when the current user has a too low password level. Go to the properties of the button: under tab 'enable' you can set a password level. When the current user has a too low password level, the button will not be activated. But will be visible. But when you use 'Display -> Hide from value of a tag.' The tag has the number of the password-level. Go to properties of the screen -> tab Functions -> Generate screen Select the function Write_PassWord_level_to_tag. Hope this will help. About the fixed screen: You just got one. Best regards, Wizard

Suggestion To thank Quote Answer

5/15/2006 4:54 PM	Rate (0)
Evelyne Posts: 28 Rating: (0)	Okay, but i've still got a small problem: screen 1: button is hidden from level 0 to 8 and has a password level of 1. user logs on with level 9 => thehidden button only appears after a refresh of screen 1...
Evelyne Posts: 28 Rating: (0)
Suggestion To thank Quote Answer

5/16/2006 8:55 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/15/2024 Posts: 8768 Rating: (1171)	Hi Evelyne, I see the problem. When you select screen 1 with level 1, the button is hidden. In screen 1 you log on with level 9, the button is still not displayed. Try the following: When you log on, also start a function 'select screen' with parameter screen 1. The screen will be updated. Hope this will help, Greetings, Wizard

Suggestion To thank Quote Answer

5/17/2006 11:16 AM	Rate (0)
Evelyne Posts: 28 Rating: (0)	Problem solved. Thanks!
Evelyne Posts: 28 Rating: (0)
Suggestion To thank Quote Answer

5/17/2006 11:37 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/15/2024 Posts: 8768 Rating: (1171)	Hello Evelyne, I'm happy the problem is solved It's a pleasure to be helpfull, Greetings, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on