Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

logon problem

Created by: Evelyne at: 5/29/2006 1:09 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/29/2006 1:09 PM	Rate (0)
Evelyne Posts: 28 Rating: (0)	Hi, When I click (or push) on a logon-button and log on as superuser, 4 hidden buttons becoms visible on the same screen. The problem is that sometimes the TP270 does shows my hidden buttons, but very often he doesn't. In that case, I log off (in the same screen) and then I log on again. The 2nd logon is always okay. Why does he do that ? If it works sometimes of the first time, why not always? thx, Evelyne
Evelyne Posts: 28 Rating: (0)
Suggestion To thank Quote Answer

5/29/2006 8:24 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi which ProTool version are you using? nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

5/30/2006 9:13 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/15/2024 Posts: 8768 Rating: (1171)	Hi, Are You using the right image for the panel. I mean the image that's delivered with the Protool version you're using. Best regards, Wizard

Suggestion To thank Quote Answer

5/30/2006 12:59 PM	Rate (0)
Evelyne Posts: 28 Rating: (0)	I'm using ProTool/Pro V6.0 SP2
Evelyne Posts: 28 Rating: (0)
Suggestion To thank Quote Answer

5/31/2006 2:52 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/15/2024 Posts: 8768 Rating: (1171)	Hello, Have you already performed an OS-update? BTW, you can obtain SP3 with following link. http://support.automation.siemens.com/WW/view/en/19962184 Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on