Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Move servo with SCL code

Created by: tay fur at: 12/26/2014 10:46 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/26/2014 10:46 AM	Rate (0)
tay fur Posts: 6 Rating: (3)	Hello; I need simple code for my project. I want to push a button and servo move 50mm. My code is not run! Servo no move. did you send to me sample code? //************************************************ IF #buton = true AND "MC_MoveAbsolute_DB".Done=TRUE AND "MC_MoveAbsolute_DB".Busy = FALSE THEN "MC_Home_DB"(Axis:="Axis_1",Mode:=0); "MC_MoveAbsolute_DB" (Axis := "Axis_1", Execute := TRUE,Velocity:=50, Position := 100); END_IF; //************************************************
tay fur Posts: 6 Rating: (3)
Suggestion To thank Quote Answer

12/26/2014 1:09 PM	Rate (0)
Madhava Silver Member Joined: 11/26/2011 Last visit: 6/29/2023 Posts: 508 Rating: (23)	check the data type/format of inputs. it may be ..

Suggestion To thank Quote Answer

12/26/2022 9:46 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	New question published by AutoGen_361560 is split to a separate thread with the subject Move servo . Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on