Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Step 7 PLCSIM Not Working

Created by: WRCKLSS at: 3/4/2020 8:35 AM (8 Replies)

Rating (3)

Thanks 5

9 Entries

3/4/2020 8:35 AM	Rate (0)
WRCKLSS Member Joined: 10/5/2018 Last visit: 9/2/2023 Posts: 1 Rating: (0)	After using TIA Portal Step 7 suddenly works like this. I can't test any existing project. Need help urgent. Attachment help.png (2673 Downloads)

Suggestion To thank Quote Answer

3/4/2020 11:58 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 11/15/2024 Posts: 4027 Rating: (603)	Hi, which Version of Step 7 V5.6 do you use. Best to install Service Pack 2 and also check if you have installed PLC Sim V5.4 SP8. Download- Links: STEP 7 V5.6 SP2 / S7-GRAPH V5.6 SP2 / STEP 7 Professional 2017 SR2 Trial Download Trial Software SIMATIC S7-PLCSIM V5.4 SP8 Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

10/27/2020 9:27 AM	Rate (1)
sovtis59 Member Joined: 5/3/2012 Last visit: 11/8/2023 Posts: 1 Rating: (1)	I have exact same problem now, did found any solution? All Siemens SW are updated to newest versions.

Suggestion To thank Quote Answer

10/27/2020 12:35 PM	Rate (1)
sancruz Gold Member Joined: 3/11/2019 Last visit: 11/8/2024 Posts: 1653 Rating: (305)	Hello, on my system it worked with deinstalling the current version of PLCSIM V5.4 in the windows control panel. After that, restarted the pc and installed the latest version of PLCSIM V5.4 from the download. Deinstallation was necessary before installing the latest version (also if the latest version is already installed). Maybe this helps. Trial Software SIMATIC S7-PLCSIM V5.4 SP8 including Updates Regards
	Last edited by: sancruz at: 10/27/2020 12:35:56 Last edited by: sancruz at: 10/27/2020 12:38:36 Feedback appreciated, please rate
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users dchartier Patache Paul Daniel

11/26/2020 2:19 PM	Rate (0)
chrissiapla7 Member Joined: 6/9/2020 Last visit: 6/18/2024 Posts: 2 Rating: (0)	Hi, I had the same problem and I remove and re-install the PLCSIM and works.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Towome

1/25/2021 6:55 PM	Rate (0)
RubénVW Member Joined: 1/11/2021 Last visit: 1/24/2024 Posts: 1 Rating: (0)	If you have already install this version of PLCSim you can just run the PLCSim Setup.exe (...\STEP7_V5.6\InstData\S7-PLCSIM\Media\setup.exe) and make a repair install. I had this problem and it worked to me.
	Last edited by: RubénVW at: 01/25/2021 18:58:47
Suggestion To thank Quote Answer

1/24/2022 12:42 PM	Rate (1)
AutoGen_9810408 Member Joined: 5/26/2021 Last visit: 10/18/2024 Posts: 1 Rating: (1)	Hi, what helped me was to repair the PLCSIM installation via the Windows 10 settings menu 'Apps and Features'. BR Jacob Attachment Repair PLCSIM 1.png (1720 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Towome Jiggadoo

2/11/2023 11:27 PM	Rate (0)
Assi95 Member Joined: 5/22/2022 Last visit: 5/28/2024 Posts: 2 Rating: (0)	This worked for me. Apparently I'd moved the folder and the directory of the setup.msi folder of the plcsim was changed so the it stopped working properly. I entered as Jacob said and changed the directory, and it worked. Thanks Jacob ! AutoGen_9810408 Hi, what helped me was to repair the PLCSIM installation via the Windows 10 settings menu 'Apps and Features'. BR Jacob

Suggestion To thank Quote Answer

2/24/2023 9:42 PM	Rate (0)
AutoGen_2310785 Regular Member Joined: 3/9/2017 Last visit: 9/25/2024 Posts: 1 Rating: (0)	Hi, what helped me was to repair the PLCSIM installation via the Windows 10 settings menu 'Apps and Features'.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on