Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S120 drive p0210 error

Created by: AutoGen_5121707 at: 9/22/2023 6:44 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/22/2023 6:44 PM	Rate (0)
AutoGen_5121707 Joined: 9/22/2023 Last visit: 9/22/2023 Posts: 1 Rating: (0)	I am using sinemics S120 CU and it's have erro of p0210 , I have checked supply voltage which is okk and also try to find the p0210 parameter settings in BOP and I am not able to solve this could you please give the solution, I am beginner in DRIVES , please suggest in good way .

Suggestion To thank Quote Answer

9/25/2023 2:02 PM	Rate (0)
JBS98 Regular Member Joined: 7/19/2022 Last visit: 11/15/2024 Posts: 420 Rating: (71)	Hello AutoGen_5121707 You must enter the reference voltage in p0210. It is generally set to 380V when powered from the mains. Then it is necessary to set p0340=1, this will calculate the values of p1244 and p1248. p0340 will only be set to 0 when it has been calculated. And this should be enough.
	If this Information really helps, you could use the Rate function Best Regards, JBS98
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on