Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sample Program: S7-1500 with PROFIEnergy

Created by: Denilson Pegaia at: 7/2/2013 12:36 PM (6 Replies)

Rating (2)

Thanks 1

7 Entries

7/2/2013 12:36 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, Here there is a sample program with S7-1500, ET200SP and PROFIEnergy feature. The function is managed directly in OB1 by block Call. The bit memories " " and " " command the function. This sample program was not 100% tested. There are know that in PLCSim it couldn't be tested 100% too. Attachment S71500 Profienergy.zip (853 Downloads)
	Last edited by: O_Moderator at: 7/2/2013 3:45 PM Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users CoccoBello

4/7/2014 10:28 PM	Rate (2)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, here there is a tested project. "Start Pause" and "End Pause" PLC variables command the HMI. Attachment C:\Users\z0008iwv\Documents\Bluetooth Exchange Folder\S71500_Profienergy_V13.zip (835 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/7/2017 2:02 PM	Rate (0)
Anders_KSA Regular Member Joined: 10/27/2010 Last visit: 9/2/2024 Posts: 3 Rating: (0)	Hi, If you make the same PE_START_END for the ET200SP what would be the ID number? Regards Anders

Suggestion To thank Quote Answer

5/1/2019 9:01 PM	Rate (0)
Alex_VR Regular Member Joined: 5/6/2018 Last visit: 10/25/2024 Posts: 14 Rating: (0)	Hi, You can see it in the System constants I hope it helps, Best Regards

Suggestion To thank Quote Answer

5/1/2019 9:09 PM	Rate (0)
Alex_VR Regular Member Joined: 5/6/2018 Last visit: 10/25/2024 Posts: 14 Rating: (0)	Denilson Pegaia Hi, here there is a tested project. "Start Pause" and "End Pause" PLC variables command the HMI. Hi Mr. Pegaia, I am using TIA v14 and I am trying the same thing, but the Panel does not Start the Pause. In the diagnostics buffer it sends me the next error: "IO device failure - IO device not found", but I already checked the wiring and the device name is also correct :/ Attachment Profienergy.png (636 Downloads)
	Last edited by: Alex_VR at: 05/01/2019 23:13:22
Suggestion To thank Quote Answer

10/12/2023 10:56 AM	Rate (0)
Pandiani Bronze Member Joined: 10/31/2005 Last visit: 9/4/2024 Posts: 366 Rating: (31)	Sorry to bring back this old thread, but is it possible for someone to convert this program to either TIA v14 or TIA v15, so I can open and look into this example? I have access to machines with either TIA14 SP1 or TIA15.1. Thank you!

Suggestion To thank Quote Answer

10/13/2023 11:26 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, The converted program exceeded the size of 5MB enabled for uploads here. You can update it to V13 SP2 and after that open in TIA >V13. I place here the project print. Attachment print.pdf (377 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on