12550 Alarm _C7_NR No Defined

Hello everyone

Beforehand, thank you all for your attention, I am doing a retrofit to “Lathe X,Z Spindle”, I am using the “Sinumerik 840D”. The issue comes around every time that I want to start with the threading cycle 95 and this message pops up:

12550 “Channel 1 Block Name _C97_NR No defined or option no installed”

Hardware&Software versions

NCU: 571.3 6FC5357-0BB1-0AE1  Ver: 05.03.39 840DE

HMI PDCU 50 Ver: 06.04.21

Standart Cycles Ver: 06.04.21

Support Cycles Ver: 06.04.24

Loaded in NC: Cycle 95, GUD7.

Fault Message:

12550 “Channel 1 Block Name _C97_NR No defined or option no installed”

Section Cycle 97

%_N_CYCLE97_SPF

;$PATH=/_N_CST_DIR

PROC CYCLE97(REAL PIT,REAL MPIT,REAL SPL,REAL FPL,REAL DM1,REAL DM2,REAL APP,REAL ROP,REAL TDEP,REAL FAL,REAL IANG,REAL NSP,INT NRC,INT NID,INT VARI,INT NUMTH,REAL _VRT) SAVE DISPLOF

;VERSION: 06.05.14.00 Dec 07, 2004

;CHANGE : 06.04.17.00 Sep 08, 2003

;Gewindeschneiden

…

ENDIF

ENDIF

***** KK=0_C97_NR[0]=REP(0) _C97_AXNAM[0]=REP("")******

_AXZAHL=$ON_NUM_AXES_IN_SYSTEM-1

SBLOF

FOR II=0 TO _AXZAHL

JJ=$MC_AXCONF_MACHAX_USED[II]

IF JJ<>0

IF $MA_SPIND_ASSIGN_TO_MACHAX[AXNAME("AX"<<JJ)]<>0

_C97_NR[KK]=$MA_SPIND_ASSIGN_TO_MACHAX[AXNAME("AX"<<JJ)] _C97_NR[KK+5]=JJ

_C97_AXNAM[KK]=$MC_AXCONF_CHANAX_NAME_TAB[II] KK=KK+1

IF (KK>_SPIZAHL)

GOTOF _END_SPISUCH

…

Section DEF File

%_N_GUD7_SC_DEF

;$PATH=/_N_DEF_DIR

;VERSION: 06.05.14.00 Dec 07, 2004

;CHANGE : 06.05.11.00 Oct 28, 2003

;Datenbaustein fuer Zyklen allgemein und fuer Standardzyklen

APR 11 APW 11

N10 DEF CHAN INT _ZSD[10]=0

N20 DEF CHAN REAL _C97[4]

*******N30 DEF CHAN INT _C97_NR[11]=SET(1,0,0,0,0,4,0,0,0,0,1)*******

N40 DEF CHAN STRING[8] _C97_AXNAM[5]=SET("C")

N50 DEF CHAN REAL _CONT2[10]

N51 DEF NCK INT _SC_MASK[10]=SET(0,0,0)

N300 REDEF $MC_TOOL_CARRIER_RESET_VALUE APR 7 APW 7

…

Hi,

Have you looked in the parameters area and GUD data to see if the variable has actually been created?.

Pee

Hi, Pet. thanks for your repply,.

I can see that the files are loaded, i see the picture, however, it doesn't seem to be any data.?

Sinumerik 802d

Cycle 95 below alarm popping cycle start

12550 alarm channel 1 block identifier _ktl_not defined or option does not exist