Networking A multi processor S5 135U rack with an S7 1511PN

Dear Experts,

We are going to send some tags from our S5 135U station (with two S5 135U CPUs installed in the Rack) to a S7 1511PN CPU through a  CP1430 TCP  ethernet card. There are some documents and instructions in the siemens support pages for setting up and communicating an S5 CPU to an S7 1500 CPU but as I mentioned there are two S5 CPUs which are installed in our system's rack(multi processor mode) and unfortunately I couldn't find info's for this situation.

I would appreciate it if somebody would help me in this case.

Thx

Define tags, configure communication protocols, write PLC logic, store tags in Data Blocks, map tags to HMI/SCADA, test thoroughly, and ensure reliable data transmission within thecorporate network.