Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

recipe run logic ?

Created by: AutoGen_8586569 at: 7/19/2024 7:55 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/19/2024 7:55 AM	Rate (0)
AutoGen_8586569 Joined: 7/5/2023 Last visit: 7/25/2024 Posts: 7 Rating: (0)	Hello I use ktp basic series HMI I created a recipe the tia portal. Recipe name xxxx. The data I create on the tia portal is permanent. The data I save via the HMI is not permanent. When I restart the HMI again, the data I save is deleted. recipe xxxx data 1 (on tia) data 2 ( on hmi) after restart HMI just have recipe xxxx data 1 (on tia)
	Last edited by: AutoGen_8586569 at: 07/19/2024 07:56:23
Suggestion To thank

7/25/2024 8:05 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/5/2024 Posts: 14087 Rating: (1766)	Hello you postet twice: https://support.industry.siemens.com/forum/de/en/posts/recipe-basic-panel/319593/?page=0&pageSize=10 Please do not open multible Topics to the same issue... Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank

7/25/2024 10:29 AM	Rate (0)
Wit_Moderator Moderator Joined: 8/21/2014 Last visit: 11/5/2024 Posts: 1024 Rating: (14)	Closed cause question posted twice. The second thread with the subject Recipe Basic panel is published within the conference SIMATIC WinCC (TIA Portal) Best regards, The Helping Hand
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Wit_Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on