Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO! 8.4: Siemens Third-Party Software Disclosure Document

Created by: AutoGen_8566841 at: 7/18/2024 5:02 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

7/18/2024 5:02 PM	Rate (0)
AutoGen_8566841 Joined: 7/18/2024 Last visit: 7/18/2024 Posts: 2 Rating: (0)	I have exactly the same problem as Joo_mama. i have enabled the web user but still get a Siemens Third-Party Software Disclosure Document as i type in the IP adress. ------------------------------------------------------------------------------------------ Split from LOGO! 8.4 + LWE 1.2 can t connect to the visualisation.. Attachment web server access.png (143 Downloads)
	Last edited by: Wit_Moderator at: 07/22/2024 11:57:10 New subject after splitting
Suggestion To thank Quote Answer

7/18/2024 5:10 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/6/2024 Posts: 34150 Rating: (4254)	Then is the web server not complete activated. When you enable the web user, have you set a password and then pressed "Apply"?

Suggestion To thank Quote Answer

7/18/2024 5:30 PM	Rate (0)
AutoGen_8566841 Joined: 7/18/2024 Last visit: 7/18/2024 Posts: 2 Rating: (0)	Yes i did

Suggestion To thank Quote Answer

7/18/2024 6:00 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/6/2024 Posts: 34150 Rating: (4254)	Start a Support Request ...

Suggestion To thank Quote Answer

7/19/2024 4:41 AM	Rate (0)
AutoGen_380038 Silver Member Joined: 9/11/2014 Last visit: 10/31/2024 Posts: 775 Rating: (33)	AutoGen_8566841 Yes i did Hi, If you only see "Siemens Third-Party Software Disclosure Document" then the web-Server is NOT enabled. What you see is only the OSS information. Open in LOGO! Soft Comfort Tools/Access controll and enable the Web-server and specify a PW. Be sure you have the right LOGO!Soft Comfort used. Then try again.

Suggestion To thank Quote Answer

8/1/2024 12:53 PM	Rate (0)
TheVoice Member Joined: 8/24/2021 Last visit: 9/19/2024 Posts: 11 Rating: (0)	Hello, You can try also to change Web Browser. In my case with Google Chrome, the message was the same: "Siemens Third-Party Software Disclosure Document ...." Later tried with Microsoft Edge and now it's working properly :) Best Regards!
	Last edited by: TheVoice at: 08/01/2024 12:54:11
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on