Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

logo to wincc unified

Created by: MPBusuttil at: 7/24/2024 12:23 PM (5 Replies)

Rating (0)

Thanks 1

6 Entries

7/24/2024 12:23 PM	Rate (0)
MPBusuttil Advanced Member Joined: 11/8/2018 Last visit: 10/4/2024 Posts: 88 Rating: (0)	Good afternoon, Can some one help me on how to show and store analogue values from the siemens logo(with CIM and internet) and the winnCC Unified (scada) Thanks Mark Paul Busuttil

Suggestion To thank Quote Answer

8/5/2024 7:17 AM	Rate (0)
LOGO! Support Gold Expert Joined: 9/19/2018 Last visit: 11/5/2024 Posts: 396 Rating: (46)	WinCC Unified is not compatible with LOGO!. LOGO!CIM can be used as router for LOGO!. For storing LOGO! values I recommend using the Data Log function of LOGO!.

Suggestion To thank Quote Answer

8/5/2024 9:49 AM	Rate (0)
MPBusuttil Advanced Member Joined: 11/8/2018 Last visit: 10/4/2024 Posts: 88 Rating: (0)	Not even with TCP/IP? And I have videos on you tube that they select logo as the communication Modbus and they have used digital input so how did they manage to do it? or is there a 3rd party software that I can use?

Suggestion To thank Quote Answer

8/7/2024 8:29 AM	Rate (0)
LOGO! Support Gold Expert Joined: 9/19/2018 Last visit: 11/5/2024 Posts: 396 Rating: (46)	As WinCC Unified is not released for LOGO!, I recommend using another solution. As nobody will try it here, I can’t totally exclude that something is working nevertheless. But as long it’s not named compatible the same may not working any more with next LOGO! or Unified version. Hint: Generally LOGO! 8.1 or newer supports Modbus TCP. As possible solution you can build a simply Scada system for LOGO! by using LWE (LOGO! Web Editor). The needed webserver is included in LOGO!8. You need only to activate it (menu Tools > Transfer > Access control). Or you use a SIMATIC PLC with WinCC Unified.

Suggestion To thank Quote Answer

8/7/2024 9:00 AM	Rate (0)
MPBusuttil Advanced Member Joined: 11/8/2018 Last visit: 10/4/2024 Posts: 88 Rating: (0)	Thanks for your reply. The LWE is already installed and I am using a Simatic PLC with WinnCC Unified. so if I use Modbus TCP its should work right? Thanks

Suggestion To thank Quote Answer

8/7/2024 9:23 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/6/2024 Posts: 34150 Rating: (4254)	The User Murof has wrote that it works. Unified Panel to LOGO! Connection - 313651 - Industry Support Siemens

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_380038

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on