Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Integration BACnet MS/TP by PXC5.E003

Created by: Ng H Hoàng at: 8/25/2024 1:43 PM (1 Replies)

Rating (1)

Thanks 0

2 Entries

8/25/2024 1:43 PM	Rate (0)
Ng H Hoàng Joined: 8/26/2022 Last visit: 8/25/2024 Posts: 6 Rating: (0)	Hi Everyone, I have project integration 3rd party BACnet MS/TP by PXC5.E003. I configured PXC5.E003 as attach image (image 1,2), led COM2 RX flashing (attach video), but in tab Device Discovery nothing any device appear (image 3), and Infra'NwkPortMSTP(1) alarm Configuration error (image 4,5,6), although i scan by Yabe is OK (image 7). So, who has successfully integrated, please share me to how, my ABT is V5.2. Thank you so much. Attachment Integration BACnet MSTP by PXC5.E003.zip (279 Downloads)

Suggestion To thank Quote Answer

8/25/2024 4:28 PM	Rate (1)
CJ. Gold Expert Joined: 11/8/2017 Last visit: 11/12/2024 Posts: 341 Rating: (195)	Hi, The discovery that you're trying to run from the PXC5 web UI is not for discovering BACnet points. There is no way to discover BACnet points from the web UI, or from within ABT either. You will need to use something like YABE, which you are already using. The information from YABE allows you to build the data points in the PXC5 for reading / writing values from / to the BACnet MSTP device. If you connect to the IP side of the PXC, and run YABE on the PXC's IP address - does the discovery work? For the RX LED that is flashing, this is not right. From your screen shot of YABE, are you using some sort of USB to 485 converter? If yes, do you have YABE scanning the MSTP network at the same time that the PXC is connected to the MSTP network? Does the PXC RX LED continue to flash after you disconnect the MSTP network from the USB to 485 converter? Regards,

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on