Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Integrating Logo7 into a Logo8 environment

Created by: Tcmatik at: 8/22/2024 8:33 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/22/2024 8:33 AM	Rate (0)
Tcmatik Advanced Member Joined: 3/30/2014 Last visit: 8/26/2024 Posts: 85 Rating: (0)	How can I connect a Logo7 to a Logo8. I mean on network level. Between 2 Logo8 is just drawing a connection. Brilliant. But for the Logo 7 it will be something different. Practically it comes down to the Logo7 having to control 3 relays. Or am I asking the impossible?

Suggestion To thank Quote Answer

8/22/2024 9:36 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/6/2024 Posts: 34150 Rating: (4254)	Describe in more detail which signals you want to exchange in which direction between the 0BA7 and the 0BA8.

Suggestion To thank Quote Answer

8/22/2024 9:57 AM	Rate (0)
Ella_68 Gold Member Joined: 6/11/2019 Last visit: 11/5/2024 Posts: 2307 Rating: (102)	Hello Tomatik, It is not possible to create a connection between the two logo programs.You have to configure the S7 connection manually. Regards, Ella_68

Suggestion To thank Quote Answer

8/22/2024 10:00 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/6/2024 Posts: 34150 Rating: (4254)	It's possible to switch 3 outputs of the 0BA7 from a 0BA8. Attachment Untitled.jpg (113 Downloads)

Suggestion To thank Quote Answer

8/26/2024 2:46 PM	Rate (0)
Tcmatik Advanced Member Joined: 3/30/2014 Last visit: 8/26/2024 Posts: 85 Rating: (0)	ixo65 It's possible to switch 3 outputs of the 0BA7 from a 0BA8. What a hassle to log in these days. But come on, I finally managed it again. As for my question, I'm going to try it out one of these days. Thanks in advance for the answer.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on