Navigation

415 Drive: DC link over Voltage issues

Created by: lokonath_dey67 at: 9/24/2024 11:21 AM (1 Replies)

9/24/2024 11:21 AM	Rate (0)
lokonath_dey67 Joined: 9/24/2024 Last visit: 9/24/2024 Posts: 1 Rating: (0)	EOT CRANE LONG TRAVEL(LT) THE DRIVE IS SINAMICS G120C . I HAVE BEEN HAVING RECURRING DC LINK OVER VOLTAGE ISSUES.OUR LINE VOLTAGE IS 415 DRIVE IS 75KW MOTOR IS 44KW.I NEED SOLUTION.... ------------------------------------------------------------------------------------------ Split from how to measure Master Drive DC link voltage .
	Last edited by: lokonath_dey67 at: 09/24/2024 11:22:57 Last edited by: Moderator_Lan at: 09/24/2024 11:41:51 New subject after splitting
Suggestion To thank Quote Answer

9/24/2024 2:12 PM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 11/15/2024 Posts: 4793 Rating: (733)	In what circumstances does this overvoltage occur?
	Last edited by: jacek d at: 09/24/2024 14:12:26 Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer