Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

"Invalid XOR total" message when upload to LOGO

Created by: PtitCalson at: 7/23/2009 9:28 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/23/2009 9:28 PM	Rate (0)
PtitCalson Posts: 1 Rating: (0)	Hello Experts, I'm encountering problems while trying to upload a program in our LOGO! 12/24 RC. The error message , in french, is "Total Xor non valable" which can be translated in English by "Invalid XOR Total". I first throught this message means that my new program contains too many blocks (I'm using a lot of "OR" elements). But when I download the currently active program and upload it again without any change, I'm getting the same error! I get this error whatever the LOGO!Soft Confort version used (V4.0 or V6.1). The problem does not appear while downloading from LOGO to PC... only while uploading. Could you please help? Many thanks in advance. Jerome.
PtitCalson Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/24/2009 9:12 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, if you press F2 what is shown in the LSC Info screen? Post your program so some can check it. Regards
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on