Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MP177DP project transfer

Created by: OK2PPP at: 10/2/2006 5:57 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/2/2006 5:57 PM	Rate (0)
OK2PPP Posts: 19 Rating: (0)	I have problem with project transfering to Mobile Panel 177DP(from notebook with PCMCIA CP5512; RS232). There is only 2 lines on panel after turn on power: bootloader 1.0 and 01.2005. According to manual there should be menu "Loader" with option: "Transfer", "Start", "Control Panel" and "Taskbar". I tried transfer project to 177DP via MPI/DP and serial RS232 without success (I lost 7hour with experimenting, with TP170B there is no problem). Operating system didn't start maybe. I don't know. Could somebody help me?
OK2PPP Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

10/3/2006 9:10 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/15/2024 Posts: 8768 Rating: (1171)	Hello OK2PPP, Try to perform an OS update (operating system update) Here is a faq how to perform: http://support.automation.siemens.com/WW/view/en/19701610 Please try it with the option 'Booting' Hope this will help. Best regards, Wizard

Suggestion To thank Quote Answer

10/3/2006 7:18 PM	Rate (0)
OK2PPP Posts: 19 Rating: (0)	Many thanks, I did OS update and it works OK (the only probem was in DIP swithes on RS232/PPI adapter). [:)] By, OK2PPP
OK2PPP Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

10/4/2006 9:05 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/15/2024 Posts: 8768 Rating: (1171)	Hi, I'm glad everything is working fine. Greetings, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on