Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Protool Pro & OPC

Created by: adri71 at: 10/10/2006 11:37 PM (3 Replies)

Rating (2)

Thanks 0

4 Entries

10/10/2006 11:37 PM	Rate (0)
adri71 Posts: 2 Rating: (0)	I have two Protool Pro runtime running in two PCs; the first it's set as OPC server, and the second it's set as OPC client.I have a lot of problem connecting the Client with the Server; using the suggestion of the opcfoundation.org i have setting the two machines with the right firewall and dcom settings (i think), but the only way to comunicate i found it's to logging in both the pc's as the same user!The pc's are running windows XP pro and Protool Pro V6 sp3.If i connect the two pc's with different use and try to connect a variable using the button "Browse" a messag i recive it's like this: Impossible to connect to the interface oftheOpc.SimaticHmi.Ptpro, causeAcces Deneied Sorry For my Bed English Tanks
adri71 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/13/2006 12:22 PM	Rate (0)
The Brain Gold Member Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating: (121)	Hi, did you the following FAQs? Maby this will be help. => http://support.automation.siemens.com/WW/view/de/15248719 => http://support.automation.siemens.com/WW/view/de/22701694 greetings,

Suggestion To thank Quote Answer

10/13/2006 4:25 PM	Rate (2)
Jesper Pedersen Posts: 279 Rating: (30)	It is probably a DCOM problem. This manual describes how to setup DCOM: http://support.automation.siemens.com/WW/view/en/13542666 edit: go to chapter 18 !
Jesper Pedersen Posts: 279 Rating: (30)	Last edited by: Jesper Pedersen at: 10/13/2006 4:26 PM
Suggestion To thank Quote Answer

10/16/2006 4:46 PM	Rate (0)
adri71 Posts: 2 Rating: (0)	Tank's a lot for your help!!! It's a problem in Dcom setting on the Server Machine!! I have follow the istructions on the faq you have post and the problem was solved!
adri71 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on